ORIGIN Custom Implant Abutment

Titanium and Hybrid
ORIGIN Intelligence Custom Implant Abutment

Compatible with Major Implant Systems

Multiple platforms are FDA cleared, with additional platforms pending

The zirconia abutments are cemented to the titanium interface to become one strong unit

Best of Both Worlds: The precise fit of a titanium interface with the colored aesthetics of a custom designed zirconia abutment

The titanium interface provides the necessary metal-to-metal connection between screw and implant. There is no compromise on the standard recommendation for torque pressure on the screw and abutment since the screw does not torque directly into the zirconia material.

Precision Dental Milling Center Lab
  • NobelReplace*
    Available Sizes: NP, RP, WP, 6.0mm
  • Zimmer Screw-Vent* Available Sizes: 3.5mm, 4.5mm, 5.7mm
  • NobelActive*
    Available Sizes: NP, RP, WP
  • Straumann Bone Level*
    Available Sizes: NC, RC
  • Biomet 3i Certain*
    Available Sizes: 3.4mm, 4.1mm, 5.0mm, 6.0mm
  • Brånemark System RP*
    Available Sizes: 4.1mm
ORIGIN Titanium Dental Implant Abutment

In-house Milling for
Intelligence™ Titanium Custom Implant Abutments

  • Custom Designed Abutments Using the Intelligence or 3Shape Scanner
  • Precision & Cost Savings by Utilizing Titanium Blanks with Pre-milled Interface
  • Compatible with Major Implant Systems
  • Multiple Platforms are FDA Cleared, with Additional Platforms Pending

The one-piece ORIGIN® Intelligence™ Titanium Custom Implant Abutment is milled on the ORIGIN system in an average of 15 minutes at a per unit material cost of $45.00, including the final screw.

The patent pending production process makes quick work of abutment milling by processing ORIGIN Intelligence titanium blanks that have the pre-milled implant abutment interface. The Pre-milled interface portion of the ORIGIN Intelligence titanium blanks are fabricated on an industrial Swiss lathe in order to provide consistent and accurate results. The pre-milled interface is FDA cleared for compatibility with the respective implant platform.

ORIGIN mill owners place the Pre-milled ORIGIN Intelligence blank from B&D Dental in the Intelligence blank holder where the top portion of the one-piece titanium abutment is milled. Before milling, the ORIGIN system employs a touch probe process to ensure alignment and accuracy. The touch probe calibration is accurate to 2 microns.

The Origin Intelligence Scan Abutment Kit and accompanying software library used for the scanning of the model are compatible with both the ORIGIN Intelligence and 3Shape scan & design systems. The ORIGIN Intelligence Titanium Custom Implant Abutment system is a cost effective, accurate and efficient method for producing in-house titanium custom abutments.

ORIGIN Titanium Implant Compatability

ORIGIN Intelligence Scanner
Precision Dental Milling Center Lab
  • Zimmer Screw-Vent*
    Available Sizes: 3.5mm,
    4.5mm, 5.7mm
  • Brånemark System RP*
  • Straumann Bone Level*
    Available Sizes: NC, RC
  • Biomet 3i Certain*
    Available Sizes: 3.4mm, 4.1mm, 5.0mm, 6.0mm
  • NobelReplace*
    Available Sizes: NP, RP, WP, 6.0mm
  • NobelActive*
    Available Sizes: NP, RP/WP
  • Astra Tech OsseoSpeed*
    Available Sizes: 3.0, 3.5/4.0, 4.5/5.0

*Not a trademark of B&D Dental

Best of Both Worlds:
The precise fit of a titanium interface with the colored aesthetics of a custom designed zirconia abutment.

ORIGIN hybrid Implant AbutmentThe ORIGIN Custom Hybrid Implant Solution combines the strength and precise fit of a titanium interface with the aesthetic advantages of shaded zirconia. The close-tolerance machined titanium interface provides an accurate fitting surface with the implant and titanium retaining screw as well as the necessary metal-to-metal connection between the screw and implant. There is no compromise on the standard recommendation for torque pressure on the scvrew and abutment since the screw does not torque directly into the zirconia material thus eliminating any potential fracturing of the abutment. The zirconia abutment is milled from ORIGIN HS Zirconia and then cemented to the titanium interface resulting in a restoration that is both exceptionally strong and aesthetically pleasing.

 

Precision Brochure
Titanium & Zirconia Flyer
Lab Slip